King-Care leather cleaning system
Stage 1
Cleaning (White King-Care container)
Five-step Cleaning Instructions
- Remove surface dust and dirt from the leather using a vacuum with a soft brush attachment.
- Spray cleaner onto a small area of the leather from a distance of around 10cm.
- Using the soft King-Care sponge clean the moistened area with small, circular movements. Repeat over the rest of the leather rinsing the sponge in clean water during the process.
- Wipe off any excess cleaning fluid with a soft, clean, dye-free cloth.
- When leather is thoroughly dry apply Stage 2 – Conditioner.
Stage 2
Conditioning (Grey King-Care container)
Five-step Conditioning Instructions
- Shake bottle well.
- Spray conditioner sparingly onto a small area of the leather from a distance of around 10cm.
- Wipe the area evenly using a soft, clean, dye-free cloth.
- Allow to dry naturally before polishing lightly with a dry King-Care cloth. For best results polish when leather is still slightly damp to touch.
- King-Care Conditioner should be applied each time leather is cleaned to restore the beauty, flexibility and rich finish of the leather.
WARNING – Before using King-Care Leather Cleaner or Conditioner, shake container well, pour a small amount of the cleaning fluid onto a clean, dye-free cloth and pre-test on a small, concealed area of the leather item. Repeat this process with the King-Care Conditioner. If the leather becomes discoloured or the leather colour comes off on the cloth using either product – do not continue. Never rub persistent stains or soak leather. For assistance contact 1300 KINGCARE (546 422).
Feedback
